Monday, July 30, 2012

Stainless Steel Fasteners for Timber Construction

Choice of fastener material

Austenitic stainless steels are considered to have Group 4 (excellent resistance)in the ranking of the resistance of common metals to corrosion by acetic acid emitted by wood.
Where CCA preservative treatments have been applied, the timber should be aged for at least seven days before fasteners are inserted. Standard for external timber framed walls recommends austenitic stainless steel as a suitable material for:
  • staples, screws, and nails for fixing sheathing and breather membranes
  • nails, screws for fixing CCA treated wood
  • wall ties and fixings.
Austenitic stainless steel is also a recommended material for external structures of woods such as cedar and permanent structures (painted or oiled).

Timber in immersed structures

Austenitic stainless steel fasteners are suitable for use in immersed timber structures. The choice of stainless steel grade will depend on water conditions such as:
  • chloride level
  • water flow rates
  • temperature
  • oxygen levels
  • crevice conditions in the fastener system geometry.
Stainless steel grade 304 (1.4301) may be suitable for fresh water, but in higher chloride levels 316 (1.4401) is preferable. BUMAX 316L HiMo (1.4436) is considered to be the strongest of 316L classifications and able to withstand corrosion longer.  http://www.BUMAX.se/en  The conditions in tidal river estuaries and seawater where higher chlorides, low flow rates and low oxygen levels can predominate may require higher molybdenum grade stainless steels such as a 6% molybdenum grade (1.4547). Care must also be taken to avoid bimetallic (galvanic) corrosion if combinations of dissimilar metals are to be used.

Timber in swimming pool buildings

Particularly aggressive internal environments can also exist in swimming pool buildings, especially for roof fixings where applied loading can also give rise to stress corrosion cracking (SCC) failure hazards. For these applications SCC resistant grades such as:
1.4436 BUMAX www.BUMAX.se/en/
1.4547
1.4529
1.4565
should be considered.

4 comments:

  1. Here at EJOT UK, we always advise people to use the highest grade of resistance for all there fasteners in order to preserve a high load strength.

    ReplyDelete
  2. Hi,
    I come across your blog through search and found its really great with lots of informative stuff about stainless steel wires, i have stored this blog URL for the references purpose. You have really done the great job.

    Stainless Steel & Stainless Steel Wires

    ReplyDelete
  3. Reading your article is such a privilege. It does inspire me also know about fasteners.

    ReplyDelete
  4. Your blog was very good to me. The blog here is very full of information.
    stainless steel cable ties

    ReplyDelete