Monday, August 20, 2012

Thread Galling of Stainless steel fasteners Prevention from another author

Written by:J oe Greenslade

A few times each year we receive calls from fastener suppliers who are in conflict with their customer over the quality of stainless steel bolts and nuts. The customer's complaint is that during installation the bolts are twisting off and/or the bolt's threads are seizing to the nut's thread. The frustration of the supplier is that all required inspections of the fasteners indicate they are acceptable, but the fact remains that they are not working. 

This problem is called "thread galling." According to the Industrial Fastener Institute's 6th Edition Standards Book (page B-28), 

Thread galling seems to be the most prevalent with fasteners made of stainless steel, aluminum, titanium, and other alloys which self-generate an oxide surface film for corrosion protection. During fastener tightening, as pressure builds between the contacting and sliding thread surfaces, protective oxides are broken, possibly wiped off, and interface metal high points shear or lock together. This cumulative clogging-shearing-locking action causes increasing adhesion. In the extreme, galling leads to seizing - the actual freezing together of the threads. If tightening is continued, the fastener can be twisted off or its threads ripped out. 

Carpenter Technologies, the fastener industry's largest supplier of stainless steel raw material, refers to this type of galling in their technical guide as "cold welding." Anyone who has seen a bolt and nut with this problem understands the graphic nature of this description. 

The IFI and Carpenter Technologies give three suggestions for dealing with the problem of thread galling in the use of stainless steel fasteners: 

1. Slowing down the installation RPM speed will frequently reduce, or sometimes solve completely, the problem. As the installation RPM increases, the heat generated during tightening increases. As the heat increases, so does the tendency for the occurrence of thread galling. 
2. Lubricating the internal and/or external threads frequently eliminates thread galling. The suggested lubricants should contain substantial amounts of molybdenum disulfide (moly), graphite, mica, or talc. Some proprietary, extreme pressure waxes may also be effective. You must be aware of the end use of the fasteners before settling on a lubricant. Stainless steel is frequently used in food related applications, which may make some lubricants unacceptable. Lubricants can be applied at the point of assembly or pre-applied as a batch process similar to plating. Several chemical companies offer anti-galling lubricants. One such source, EM Corporation, suggests their Permaslik¨ RAC product for use at the point of assembly. They suggest Everlube¨ 620C for batch, pre-applying to stainless steel fasteners. 
3. Using different stainless alloy grades for the bolt and the nut reduces galling. The key here is the mating of materials having different hardnesses. If one of the components is 316 and the other is 304 they're less likely to gall than if they're both of the same alloy grade. This is because different alloys work-harden at different rates.
Another factor affecting thread galling in stainless steel fastener applications is thread roughness. The rougher the thread flanks, the greater the likelihood galling will occur. In an application where the bolt is galling with the internal thread, the bolt is usually presumed to be at fault, because it is the breaking component. Generally, it is the internal thread that is causing the problem instead of the bolt. This is because most bolt threads are smoother than most nut threads. Bolt threads are generally rolled, therefore, their thread flanks are relatively smooth. Internal threads are always cut, producing rougher thread flanks than those of the bolts they are mating with. The reason galling problems are inconsistent is probably due largely to the inconsistencies in the tapping operation. Rougher than normal internal threads may be the result of the use of dull taps or the tapping may have been done at an inappropriately high RPM. 

Fortunately, stainless steel bolt and nut galling problems do not occur everyday, but when they do it usually creates a customer crisis. Knowledge of why this occurs and how to remedy it can save the supplier much grief and many headaches. 

Below are the questions that should be asked and the suggestions that should be made immediately when you are confronted with a customer's complaint about thread galling: 

Questions: 
Suggestions: 

1. Are you using the same driver RPM you have used in the past to install these stainless fasteners? 
If they say they are driving them faster than in the past or if they say this is a new application, suggest they immediately try slowing the driver RPM and see if the problem goes away. In general, a stainless bolt of a given size should be driven slower than a steel bolt of the same size. 

2. Are the bolts and/or internal threads lubricated? 
If they say, "no", suggest they try lubricating the bolts and/or internal threads with one of the lubricants listed above. If this eliminates the galling, you might want to batch lubricate the remainder of the order to eliminate the extra work of applying lubricant at the point of assembly. 

In applications where galling is a repetitive problem, it is advisable to supply the fasteners with pre-applied lubrication to eliminate future problems 

3. Are you using the same grade of stainless steel for the bolts and nuts? 
If the answer is, "yes", you can suggest changing one or the other to a different grade. 

Be sure the suggested grade meets their corrosion needs and changing the material does not cause a procurement problem. 

When thread galling occurs in stainless steel bolt and nut applications, don't panic. Try the suggestions listed above. One, or a combination of these, will probably resolve the problem immediately.

27 comments:

  1. Thanks for sharing all of this great information, its been really fun to read about! I think I would love to have a calgary fastener. For my place, I would have so many uses for it, thanks for sharing!

    ReplyDelete
  2. Thread galling is such a problem with Stainless Steel - a nightmere!  The bolt and nut cold-weld and you have to cut them free.  I think the best solution for a Stainless Steel lubricant is a good Nickel Anti-seize.

    ReplyDelete
  3. fastener manufacturer
    Based in India, Udehra Mechanical Works is a prominent manufacturer and exporter of huge variety of high tensile industrial fasteners like nuts and bolts which are supplied to our reputed clients.

    ReplyDelete
  4. Thank you very much for sharing an interesting post. If you will be building houses, I highly recommend you TKL- #1 steel supplier in the Philippines.

    ReplyDelete
  5. Reading your blog i got very much information about stainless steel fasteners. Thanks for sharing.

    ReplyDelete
  6. Udehra Mechanical Works is a proud manufacturer and supplier of huge variety of high tensile industrial nuts & bolts such as fastener hardware which are supplied to our national as well as international clients.


    Hot dip Galvanized Hex Nuts







    ReplyDelete
  7. Pankaj International manufactures and supplies wide variety of best quality pole line hardware, high tensile fasteners, fence fittings like 2h nuts, b7 studs, hex nuts, hex bolts and many other line construction hardware products.

    Fasteners exporter India




    ReplyDelete
  8. Based in India, Udehra Mechanical Works is a prominent manufacturer and suppliers of huge variety of high tensile industrial fasteners like nuts and bolts which are supplied to our reputed clients.

    Bolts and Nuts Manufacturer india










































































    ReplyDelete
  9. A group of highly dedicated and experienced employees form a dynamic team, The manufacture of Gear Cutting Tools, Broaches and Allied Products.

    Worm hobs
















    ReplyDelete
  10. Pankaj International is committed to developing, manufacturing, delivering and servicing quality products. Our goal is to continuously improve our products and services in order to satisfy the needs of our customers before, during and after sales.

    In each of our product Category our quality is amongst the best in the world. We use the best quality of raw materials that are tested and subjected to stringent standards as per required specifications. Process capability studies & other statistical tools are employed to check all critical parameters during production. Every batch of finished product undergoes strict down the line process control monitoring which guarantees superior quality products. As a result, Pankaj International is synonymous with technology, quality and service.

    Fasteners Suppliers




    ReplyDelete
  11. Thanks for providing this information was of great help for my needs, Keep posting content related to
    Stainless steel bolts

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. Supplies wide variety of best quality pole line hardware, high tensile fasteners and many other line construction hardware products.thanks for sharing the article.

    ReplyDelete
  14. This comment has been removed by the author.

    ReplyDelete
  15. Sounds Good,
    TechBasha is best screws and fixings suppliers in New Zealand, provides the all kind of electrical products at wholesale price. Thanks for sharing this amazing stuff.

    ReplyDelete
  16. Thanks to this post, I now know a lot more than I did before. also check
    Super Duplex Steel S32750 Plates

    ReplyDelete
  17. I will certainly put your excellent suggestions to use. would you like to see Stainless Steel Earth Rods

    ReplyDelete
  18. I just found your blog, and I can't get enough of your helpful information. check Hastelloy C22 Bolt

    ReplyDelete
  19. It is a new perspective on for me. I appreciate your distinct viewpoint.
    Duplex Steel 2507 Plate

    ReplyDelete
  20. After reading this post, I was motivated to take action. I appreciate the inspiration. check this product UNS S30403 Stainless Steel Coil

    ReplyDelete
  21. This comment has been removed by the author.

    ReplyDelete
  22. This comment has been removed by the author.

    ReplyDelete
  23. It is admirable that you can explain complicated topics in simple terms. It's a fresh take for me. I admire your distinct point of view. also visit ATSM A500 Pipe

    ReplyDelete
  24. I came into your article and found it to be really informative; it would be a pleasure if you see DH 36 Plates

    ReplyDelete
  25. Nice Blog ! Keep it up!! Thanks a lot for sharing a post that I found interesting.  check this product Duplex S31803 Plate 

    ReplyDelete
  26. Your writing style is amazing. Keep up your excellent work. You may find additional information about the 90-degree elbow on my website.

    ReplyDelete